Test4actual certification

Exam : Cisco 642-067
Title : Advanced Routing and Switching for Field Engineers
Version : v11.21
1. Why is it appropriate to use conditional label advertising when deploying MPLS?
Select the best response.
A. to make CEF tables smaller
B. to enable label switching on the frame mode interface
C. to restrict MPLS availability to predefined time periods
D. to restrict label switching to a limited number of networks
E. to restrict end users from seeing the routers in the MPLS network
Answer: D
2. Which three of the following steps are mandatory when configuring MPLS on Cisco IOS? (Choose three.)
Select 3 response(s).
A. start LDP
B. enable CEF switching
C. configure the MPLS ID
D. disable IP TTL propagation
E. configure conditional label advertising
F. enable label switching on frame mode interfaces
Answer: ABF
3. How are RIP routing contexts implemented in MPLS VPN?
Select the best response.
A. RIP does not support routing contexts
B. routing contexts are implemented in a single routing process
C. routing contexts are implemented using multiple routing processes
D. routing contexts are implemented as several instances of a single routing process
E. routing contexts are implemented as a single instance of several routing processes
Answer: D
4. Which two of the following statements are true about HSRP load sharing? (Choose two)
Select 2 response(s).
A. It is achieved by using more than one HSRP group.
B. It is done in regards to either round robin or weight basis.
C. It is used to offload the active router in a certain HSRP group.
D. Single group HSRP is used to achieve more efficient link utilization.
E. The return traffic is influenced by HSRP load sharing configuration.
Answer: AC
5. Which of the following statements about authentication responses and conditions is true? (Choose two.)
Select 2 response(s).
A. When a router receives a failure response, it stops querying authentication methods.
B. When a router receives an error response, it stops querying authentication methods.
C. If the router receives a failure response from an authentication method, it queries the next method.
D. The router does not differentiate between failure and error responses; the authentication process is always interrupted.
E. If it receives no response from the authentication method, a router will determine the error condition on its own; the router also has the option to proceed to the next method in a list if configured accordingly.
Answer: AE

http://www.test4actual.com/642-067.html

6. When you issue the logging trap informational command, what happens?
Select the best response.
A. An information trap is sent to the SNMP server.
B. Informational and debug messages are logged to the syslog server.
C. All messages are sent to the logging host, where selections are made.
D. All messages from emergencies to informational are sent to the logging host.
Answer: D
7. Refer to the exhibit. This shows the NetFlow statistics for a router. You are analyzing the traffic pattern and you are interested in the percentage of packets between 32 and 64 bytes in size and the number of flows in progress. Which of these identifies both numbers correctly?151011172.gif
Select the best response.
A. 69.4%, 4061
B. 24.9%, 980
C. 69.4%, 35
D. 6.94%, 980
E. cannot be determined from this output
Answer: C
8. What will happen if you issue the redundancy force-switchover command on a Catalyst 6500 Series Switch with redundant supervisor modules?
Select the best response.
A. reset of the primary supervisor
B. manual switchover from standby to active supervisor
C. manual switchover from active to standby supervisor
D. automatic switchover from active to standby on primary supervisor failure
Answer: C
9. You are considering deploying the Cisco SSL VPN AIM module in a Cisco 1800 Series Router. Which benefit should you expect?
Select the best response.
A. to improve performance exclusively for SSL VPN applications
B. to improve performance up to 300% for both IPsec and SSL VPN applications
C. to improve performance for both IPsec and SSL VPN applications with IPsec encryption taking place in hardware
D. to improve performance up to 200% for both IPsec and SSL VPN applications with encryption taking place in hardware
E. to improve performance up to 300% for both IPsec and SSL VPN applications with SSL encryption taking place in hardware
Answer: D
10. During which phase is a proposal developed and delivered?Select the best response.
A. Prepare
B. Plan
C. Design
D. Operate
Answer: A

Exam : Cisco 642-067
Title : Advanced Routing and Switching for Field Engineers
Version : v11.21
1. Why is it appropriate to use conditional label advertising when deploying MPLS?
Select the best response.
A. to make CEF tables smaller
B. to enable label switching on the frame mode interface
C. to restrict MPLS availability to predefined time periods
D. to restrict label switching to a limited number of networks
E. to restrict end users from seeing the routers in the MPLS network
Answer: D
2. Which three of the following steps are mandatory when configuring MPLS on Cisco IOS? (Choose three.)
Select 3 response(s).
A. start LDP
B. enable CEF switching
C. configure the MPLS ID
D. disable IP TTL propagation
E. configure conditional label advertising
F. enable label switching on frame mode interfaces
Answer: ABF
3. How are RIP routing contexts implemented in MPLS VPN?
Select the best response.
A. RIP does not support routing contexts
B. routing contexts are implemented in a single routing process
C. routing contexts are implemented using multiple routing processes
D. routing contexts are implemented as several instances of a single routing process
E. routing contexts are implemented as a single instance of several routing processes
Answer: D
4. Which two of the following statements are true about HSRP load sharing? (Choose two)
Select 2 response(s).
A. It is achieved by using more than one HSRP group.
B. It is done in regards to either round robin or weight basis.
C. It is used to offload the active router in a certain HSRP group.
D. Single group HSRP is used to achieve more efficient link utilization.
E. The return traffic is influenced by HSRP load sharing configuration.
Answer: AC
5. Which of the following statements about authentication responses and conditions is true? (Choose two.)
Select 2 response(s).
A. When a router receives a failure response, it stops querying authentication methods.
B. When a router receives an error response, it stops querying authentication methods.
C. If the router receives a failure response from an authentication method, it queries the next method.
D. The router does not differentiate between failure and error responses; the authentication process is always interrupted.
E. If it receives no response from the authentication method, a router will determine the error condition on its own; the router also has the option to proceed to the next method in a list if configured accordingly.
Answer: AE

http://www.test4actual.com/642-067.html

6. When you issue the logging trap informational command, what happens?
Select the best response.
A. An information trap is sent to the SNMP server.
B. Informational and debug messages are logged to the syslog server.
C. All messages are sent to the logging host, where selections are made.
D. All messages from emergencies to informational are sent to the logging host.
Answer: D
7. Refer to the exhibit. This shows the NetFlow statistics for a router. You are analyzing the traffic pattern and you are interested in the percentage of packets between 32 and 64 bytes in size and the number of flows in progress. Which of these identifies both numbers correctly?151011172.gif
Select the best response.
A. 69.4%, 4061
B. 24.9%, 980
C. 69.4%, 35
D. 6.94%, 980
E. cannot be determined from this output
Answer: C
8. What will happen if you issue the redundancy force-switchover command on a Catalyst 6500 Series Switch with redundant supervisor modules?
Select the best response.
A. reset of the primary supervisor
B. manual switchover from standby to active supervisor
C. manual switchover from active to standby supervisor
D. automatic switchover from active to standby on primary supervisor failure
Answer: C
9. You are considering deploying the Cisco SSL VPN AIM module in a Cisco 1800 Series Router. Which benefit should you expect?
Select the best response.
A. to improve performance exclusively for SSL VPN applications
B. to improve performance up to 300% for both IPsec and SSL VPN applications
C. to improve performance for both IPsec and SSL VPN applications with IPsec encryption taking place in hardware
D. to improve performance up to 200% for both IPsec and SSL VPN applications with encryption taking place in hardware
E. to improve performance up to 300% for both IPsec and SSL VPN applications with SSL encryption taking place in hardware
Answer: D
10. During which phase is a proposal developed and delivered?Select the best response.
A. Prepare
B. Plan
C. Design
D. Operate
Answer: A

With the complete collection of questions and answers, Test4actual has assembled to take you through 60 Q&A to your 642-067 exam preparation. In the 642-067 exam resources, you will cover every field and category in Access Routing and LAN Switching helping to ready you for your successful Cisco Certification.
Exam Details
The Access Routing and LAN Switching exam is the qualifying exam available to candidates pursuing a single-exam option for the Cisco Certified Network Associate Access Routing and LAN Switching certification. The Access Routing and LAN Switching (642-067) exam will test materials from the new Interconnection Cisco Network Devices (ICND) course as well as the new Introduction to Cisco Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Cisco networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

Cisco 642-067 exam is one of the hottest IT certification exams,here are some latest cisco 642-067 exam practice which are updated by Test4actual,it will help you pass your exams,if you want.
1. Why is it appropriate to use conditional label advertising when deploying MPLS?
Select the best response.
A. to make CEF tables smaller
B. to enable label switching on the frame mode interface
C. to restrict MPLS availability to predefined time periods
D. to restrict label switching to a limited number of networks
E. to restrict end users from seeing the routers in the MPLS network
Answer: D

2. Which three of the following steps are mandatory when configuring MPLS on Cisco IOS? (Choose three.)
Select 3 response(s).
A. start LDP
B. enable CEF switching
C. configure the MPLS ID
D. disable IP TTL propagation
E. configure conditional label advertising
F. enable label switching on frame mode interfaces
Answer: ABF

3. How are RIP routing contexts implemented in MPLS VPN?
Select the best response.
A. RIP does not support routing contexts
B. routing contexts are implemented in a single routing process
C. routing contexts are implemented using multiple routing processes
D. routing contexts are implemented as several instances of a single routing process
E. routing contexts are implemented as a single instance of several routing processes
Answer: D

4. Which two of the following statements are true about HSRP load sharing? (Choose two)
Select 2 response(s).
A. It is achieved by using more than one HSRP group.
B. It is done in regards to either round robin or weight basis.
C. It is used to offload the active router in a certain HSRP group.
D. Single group HSRP is used to achieve more efficient link utilization.
E. The return traffic is influenced by HSRP load sharing configuration.
Answer: AC

5. Which of the following statements about authentication responses and conditions is true? (Choose two.)
Select 2 response(s).
A. When a router receives a failure response, it stops querying authentication methods.
B. When a router receives an error response, it stops querying authentication methods.
C. If the router receives a failure response from an authentication method, it queries the next method.
D. The router does not differentiate between failure and error responses; the authentication process is always interrupted.
E. If it receives no response from the authentication method, a router will determine the error condition on its own; the router also has the option to proceed to the next method in a list if configured accordingly.
Answer: AE

http://www.test4actual.com

6. When you issue the logging trap informational command, what happens?
Select the best response.
A. An information trap is sent to the SNMP server.
B. Informational and debug messages are logged to the syslog server.
C. All messages are sent to the logging host, where selections are made.
D. All messages from emergencies to informational are sent to the logging host.
Answer: D

7. Refer to the exhibit. This shows the NetFlow statistics for a router. You are analyzing the traffic pattern and you are interested in the percentage of packets between 32 and 64 bytes in size and the number of flows in progress. Which of these identifies both numbers correctly?
Select the best response.
A. 69.4%, 4061
B. 24.9%, 980
C. 69.4%, 35
D. 6.94%, 980
E. cannot be determined from this output
Answer: C

8. Refer to the exhibit. Which of the following statements is true?
Select the best response.
A. BGP NSF awareness is enabled
B. SSO for BGP NSF capability is enabled
C. BGP graceful restart awareness is enabled
D. 10.11.1.187 is configured as an NSF-capable BGP neighbor
Answer: A

9. What will happen if you issue the redundancy force-switchover command on a Catalyst 6500 Series Switch with redundant supervisor modules?
Select the best response.
A. reset of the primary supervisor
B. manual switchover from standby to active supervisor
C. manual switchover from active to standby supervisor
D. automatic switchover from active to standby on primary supervisor failure
Answer: C

10. You are considering deploying the Cisco SSL VPN AIM module in a Cisco 1800 Series Router. Which benefit should you expect?
Select the best response.
A. to improve performance exclusively for SSL VPN applications
B. to improve performance up to 300% for both IPsec and SSL VPN applications
C. to improve performance for both IPsec and SSL VPN applications with IPsec encryption taking place in hardware
D. to improve performance up to 200% for both IPsec and SSL VPN applications with encryption taking place in hardware
E. to improve performance up to 300% for both IPsec and SSL VPN applications with SSL encryption taking place in hardware
Answer: D

http://www.test4actual.com/642-067.html

11. During which phase is a proposal developed and delivered?
Select the best response.
A. Prepare
B. Plan
C. Design
D. Operate
Answer: A

12. Which of these correctly identifies the six phases of the Cisco Lifecycle Services framework?
Select the best response.
A. Prepare, Plan, Create, Implement, Operate, and Improve
B. Prepare, Plan, Design, Implement, Operate, and Optimize
C. Prepare, Plan, Design, Apply, Operate, and Manage
D. Prepare, Plan, Design, Implement, Operate and Manage
Answer: B

13. In which phase is a systems acceptance test plan developed and documented?
Select the best response.
A. Implement
B. Design
C. Prepare
D. Operate
Answer: B

14. In which service component of the optimize phase would you assess the routing and switching system and recommend activities such as optimizing device configurations, capacity planning, or traffic analysis?
Select the best response.
A. Change Management
B. Security Assessment
C. Operations Assessment
D. Security Administration
E. Operations Readiness Assessment
F. Technology Assessment
Answer: F

15. Which tool enables easy configuration and monitoring of Cisco ISRs?
Select the best response.
A. Cisco MWAM
B. Cisco SDM
C. Cisco NAC Appliance
D. Cisco Unified Communications Manager Express
Answer: B

http://www.test4actual.com
http://www.test4actual.com/642-067.html
http://www.examlive.com

Exam Number:642-067
Associated Certifications: Advanced Routing and Switching – Field Engineer
Duration: 60 minutes (55 -65 questions)
Available Languages: English and Japanese
Update Time:2009-11-21

Exam Description
The 642-067 ARSFE�Advanced Routing and Switching for Field Engineers exam is the exam associated with the Cisco Routing and Switching�Field Specialist certification. This exam tests a candidate’s knowledge of configuring and implementing the advanced capabilities of Cisco routing and switching solutions, verifying and troubleshooting the advanced capabilities of Cisco routing and switching solutions. Candidates can prepare for this exam by taking the ARSFE Advanced Routing and Switching for Field Engineers course.

http://www.test4actual.com
http://www.examlive.com

Product Description
Exam Number/Code: 642-067
Exam Name: Advanced Routing and Switching for Field Engineers
Questions and Answers:60Q&A
Update Time:2009-11-21
Price:$199.00

“Access Routing and LAN Switching “, also known as 642-067 exam, is a Cisco certification.
Preparing for the 642-067 exam? Searching 642-067 Test Questions, 642-067 Practice Exam, 642-067 Dumps?

With the complete collection of questions and answers, Test4actual has assembled to take you through 60 Q&A to your 642-067 exam preparation. In the 642-067 exam resources, you will cover every field and category in Access Routing and LAN Switching helping to ready you for your successful Cisco Certification.

http://www.test4actual.com
http://www.test4actual.com/642-067.html
http://blog.test4actual.com

Cisco 642-067 exam is one of the hottest IT certification exams,here are some latest cisco 642-067 exam practice which are updated by Test4actual,it will help you pass your exams,if you want.
1. Why is it appropriate to use conditional label advertising when deploying MPLS?
Select the best response.
A. to make CEF tables smaller
B. to enable label switching on the frame mode interface
C. to restrict MPLS availability to predefined time periods
D. to restrict label switching to a limited number of networks
E. to restrict end users from seeing the routers in the MPLS network
Answer: D

2. Which three of the following steps are mandatory when configuring MPLS on Cisco IOS? (Choose three.)
Select 3 response(s).
A. start LDP
B. enable CEF switching
C. configure the MPLS ID
D. disable IP TTL propagation
E. configure conditional label advertising
F. enable label switching on frame mode interfaces
Answer: ABF

3. How are RIP routing contexts implemented in MPLS VPN?
Select the best response.
A. RIP does not support routing contexts
B. routing contexts are implemented in a single routing process
C. routing contexts are implemented using multiple routing processes
D. routing contexts are implemented as several instances of a single routing process
E. routing contexts are implemented as a single instance of several routing processes
Answer: D

4. Which two of the following statements are true about HSRP load sharing? (Choose two)
Select 2 response(s).
A. It is achieved by using more than one HSRP group.
B. It is done in regards to either round robin or weight basis.
C. It is used to offload the active router in a certain HSRP group.
D. Single group HSRP is used to achieve more efficient link utilization.
E. The return traffic is influenced by HSRP load sharing configuration.
Answer: AC

5. Which of the following statements about authentication responses and conditions is true? (Choose two.)
Select 2 response(s).
A. When a router receives a failure response, it stops querying authentication methods.
B. When a router receives an error response, it stops querying authentication methods.
C. If the router receives a failure response from an authentication method, it queries the next method.
D. The router does not differentiate between failure and error responses; the authentication process is always interrupted.
E. If it receives no response from the authentication method, a router will determine the error condition on its own; the router also has the option to proceed to the next method in a list if configured accordingly.
Answer: AE

http://www.test4actual.com/642-067.html

6. When you issue the logging trap informational command, what happens?
Select the best response.
A. An information trap is sent to the SNMP server.
B. Informational and debug messages are logged to the syslog server.
C. All messages are sent to the logging host, where selections are made.
D. All messages from emergencies to informational are sent to the logging host.
Answer: D

7. Refer to the exhibit. This shows the NetFlow statistics for a router. You are analyzing the traffic pattern and you are interested in the percentage of packets between 32 and 64 bytes in size and the number of flows in progress. Which of these identifies both numbers correctly?
151011172.gif
Select the best response.
A. 69.4%, 4061
B. 24.9%, 980
C. 69.4%, 35
D. 6.94%, 980
E. cannot be determined from this output
Answer: C

8. Refer to the exhibit. Which of the following statements is true?
Select the best response.
A. BGP NSF awareness is enabled
B. SSO for BGP NSF capability is enabled
C. BGP graceful restart awareness is enabled
D. 10.11.1.187 is configured as an NSF-capable BGP neighbor
Answer: A

9. What will happen if you issue the redundancy force-switchover command on a Catalyst 6500 Series Switch with redundant supervisor modules?
Select the best response.
A. reset of the primary supervisor
B. manual switchover from standby to active supervisor
C. manual switchover from active to standby supervisor
D. automatic switchover from active to standby on primary supervisor failure
Answer: C

10. You are considering deploying the Cisco SSL VPN AIM module in a Cisco 1800 Series Router. Which benefit should you expect?
Select the best response.
A. to improve performance exclusively for SSL VPN applications
B. to improve performance up to 300% for both IPsec and SSL VPN applications
C. to improve performance for both IPsec and SSL VPN applications with IPsec encryption taking place in hardware
D. to improve performance up to 200% for both IPsec and SSL VPN applications with encryption taking place in hardware
E. to improve performance up to 300% for both IPsec and SSL VPN applications with SSL encryption taking place in hardware
Answer: D

http://www.test4actual.com/642-067.html

11. During which phase is a proposal developed and delivered?
Select the best response.
A. Prepare
B. Plan
C. Design
D. Operate
Answer: A

12. Which of these correctly identifies the six phases of the Cisco Lifecycle Services framework?
Select the best response.
A. Prepare, Plan, Create, Implement, Operate, and Improve
B. Prepare, Plan, Design, Implement, Operate, and Optimize
C. Prepare, Plan, Design, Apply, Operate, and Manage
D. Prepare, Plan, Design, Implement, Operate and Manage
Answer: B

13. In which phase is a systems acceptance test plan developed and documented?
Select the best response.
A. Implement
B. Design
C. Prepare
D. Operate
Answer: B

14. In which service component of the optimize phase would you assess the routing and switching system and recommend activities such as optimizing device configurations, capacity planning, or traffic analysis?
Select the best response.
A. Change Management
B. Security Assessment
C. Operations Assessment
D. Security Administration
E. Operations Readiness Assessment
F. Technology Assessment
Answer: F

15. Which tool enables easy configuration and monitoring of Cisco ISRs?
Select the best response.
A. Cisco MWAM
B. Cisco SDM
C. Cisco NAC Appliance
D. Cisco Unified Communications Manager Express
Answer: B

http://www.test4actual.com
http://www.test4actual.com/642-067.html
http://blog.test4actual.com