Test4actual certification

“JNCIA “, also known as JN0-341 exam, is a Juniper Networks certification.
Exam Details
The JNCIA exam is the qualifying exam available to candidates pursuing a single-exam option for the Juniper Networks Certified Network Associate JNCIA certification. The JNCIA (JN0-341) exam will test materials from the new Interconnection Juniper Networks Network Devices (ICND) course as well as the new Introduction to Juniper Networks Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Juniper Networks networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

The latest exams are provided by Test4actual,hope to help you!
1.Which command copies the factorydefault files to your backup media?
A.request system snapshot rescue
B.request system snapshot factory
C.request system snapshot default
D.request system snapshot asprimary
Correct:B

2.What are two methods of accessing a Juniper enterprise router? (Choose two)
A.RSH
B.HTTPS
C.console
D.JConfig
Correct:B C

3.What is the default route preference for static routes?
A.0
B.5
C.10
D.170
Correct:B

4.What is shown by the command show interfaces extensive fe0/0/0 but not shown by the command show interface detail fe0/0/0?
A.input error counter
B.interface MTU size
C.input packets counter
D.the IP address on logical interface fe0/
0/0.0
Correct:A

5.What does the number one (1) represent for interface fe0/0/1?
A.port number
B.PCI slot number
C.channel number
D.virtual PIC number
Correct:A

http://www.test4actual.com/Jn0-341.html

6.What are two functions of the Intel IXP processors? (Choose two.)
A.keepalives
B.routelookup
C.CRC validation
D.Layer 2 decapsulation
Correct:A C

7.Which CLI command will ping destination 10.0.29.1 ten times and display the incoming interface of the received packet?
A.ping count 10 10.0.29.1 detail
B.ping number 10 10.0.29.1 detail
C.ping count 10 10.0.29.1 extensive
D.ping number 10 10.0.29.1 extensive
Correct: A

8.Which JWeb menu displays the users currently logged into the CLI?
A.Monitor > Users
B.Manage > Users
C.Monitor > System
D.Manage > System
Correct:C

9.Which multicast address does RIPv2 use for route updates by default?
A.224.0.0.2
B.224.0.0.5
C.224.0.0.9
D.255.255.255.255
Correct:C

10.Which two statements regarding system logging on a Juniper enterprise router are correct?(Choose two.)
A.The system log has a proprietary format.
B.System logs must be sent to a remote device.
C.New system logs can be created and archived.
D.Most software processes create their own logs.
Correct:C D

http://www.test4actual.com
http://www.test4actual.com/Jn0-341.html
http://www.oracle-exam.com

Some practice updated by Test4actual may help you pass your exams.
1. Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD

2. A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD

3. By default, which command can be used to display information about packets that have been logged with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C

4. During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C

5. Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

http://www.test4actual.com/JN0-201.html

6. What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B

7. If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B

8. Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A

9. What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B

10. Three IS-IS routers on a broadcast segment have different priority values configured. Which router is elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B

Test4actual provides the latest IT exams,more juniper networks jn0-201 exam you can visit http://www.test4actual.com/JN0-201.html

http://blog.test4actual.com