Test4actual certification

It is necessary for the candidates to have the latest Jn0-101 when preparing Juniper examination. Some Networks Certified Internet Associate Junos Jn0-101 are available on the market. You should notify whether these Jn0-101 are written by expert level authors and what you can benefit from these JN0-101 practice questions. Several Networks Certified Internet Associate Junos study books contain study material at the end of each chapter. Candidates should be able to practice all these Juniper JN0-101 (Networks Certified Internet Associate Junos) questions.

The JN0-101 specified certification exam topics
Junos Configuration Basics
Describe initial configuration steps and system maintenance
Save and restore a rescue configuration
Describe network interfaces and their associated properties
Configure various types of interfaces
List and describe user authentication methods
Configure user accounts with default and custom login classes
Describe, configure and monitor syslog and tracing
Describe, configure and monitor configuration tasks, such as NTP, SNMP, and configuration archival

Operational Monitoring and Maintenance
Explain how to view relevant interface statistics and errors in the CLI
List ways of gathering state and health information for a Junos device
Explain the purpose and syntax for various network utilities such as ping, traceroute, telnet, ssh etc.
Identify the procedure for installing or upgrading Junos
Explain how to reset a lost root password

JN0-101 Juniper Communities created evaluation certifies the comprehending amount of the appearing applicants in situation of focusing on the Junos Computer from the Juniper Network JNCIA. Social networking fundamentals as well as the essential nav and transitioning ability from the customer can also be screened from this created evaluation. This Juniper Communities Accredited Web Link (JNCIA-Junos) documentation is valid only for 24 months.

Test4actual JNCIA JN0-101 Exam (Juniper Networks Certified Internet Associate, Junos (JNCIA-Junos)) offers free DEMO to download. You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

1. Which three user authentication methods are supported by the Junos OS? (Choose three.)
A.RADIUS
B.CHAP
C. local user database
D.TACACS+
E.PAP
Answer: ACD

2. What represents the binary equivalence of 207?
A.11001111
B.11101011
C.11010111
D.11010101
Answer: A

JN0-101 Juniper Cpa networks prepared evaluation concurs with the comprehending a higher level the looking job hopefuls in circumstance of working on the Junos Computer of the Juniper Community. Network basic principles together with the simple nav and moving over abilities of the selection can also be tried with that prepared evaluation. This Juniper Cpa networks Qualified Internet Associate (JNCIA-Junos) qualification applies limited to couple of years.

The JN0-101 study guide is maintained and manipulated from the Prometric testing concentrates on the international amount. The normal duration of this prepared test is roughly 105 moments and during this time, 65 multiple option queries are required to each of the looking job hopefuls. The exam is often conducted online plus the end result is instantly created payday loans to those. The leading aims of your document evaluation are described listed below. This checklist comes with a typical take a look at the skills demanded so that you can efficiently clear this test.

Test4actual hot exam : 70-693

Juniper Networks JN0-101

Test4actual for JN0-101 JNCIA certifications exam tools executes exact source to get more than 70% marks in the real time exam successfully. Since MS is famous for all its acquaintances, so certification exam material offers wonderful services for all the candidates who plan to appear in the final exam.

JN0-101 Test4actual that are available in the training tools are excessively available online for the candidates who wish to be a part of it. There are number of related products and services launched every other day. The basic aim is to generate material that increases people abilities and proficiencies. JN0-101 Test4actual certification training executes some relevant techniques that are provided by the professional.

JN0-101 Test4actual and the vital training tools give a thorough analysis in the form of sheets that includes the most possible questions that can appear in the exams. For an insight detail, it is compulsory to achieve exams taken by well-known Juniper Networks professional relook. If you take few minutes to let us know after learning JN0-101 Test4actual and tell us about your testing experience, it will provide better study aids and help others along the way.

Juniper Networks JN0-101 exam objectives:
Routing Fundamentals
Define route preference and list some default route preferences
Explain how to view the contents of the routing tables
Explain how the routing and forwarding tables differ
Describe and configure static routing
List the advantages and applications of a dynamic routing protocol

Routing Policy and Firewall Filters
Define a term
Explain when import and export policies are evaluated in relation to the learning and advertising of prefixes
List several match criteria and actions for firewall filters and routing policy
Explain some common match criteria and
Identify the results of a route or packet with a given filter or policy
Configure a routing policy and firewall filters

Test4actual JNCIA JN0-101 Exam (Juniper Networks Certified Internet Associate, Junos (JNCIA-Junos)) offers free DEMO to download. You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

7. What must be configured prior to the first commit after factory defaults are loaded?
A. root authentication
B. default gateway
C. hostname
D. management services
Answer: A

8. Which account is used to access a Junos device in factory-default configuration?
A. root
B. admin
C. juniper
D. user
Answer: A

The online training tools that are listed on the websites may include the JN0-101 certification exam Test4actual so that they can be downloaded from there. It is a reliable method to gain the desired profession but it is compulsory for the candidate to be a part of the certification plan. There is thousands of virtual and local guiding and related training centers who give JN0-101 guidance to everyone and also serve the same correct Test4actual.

Test4actual offers you a comprehensive look at the best prospects available in JN0-101 Study Guide throughout the Industry. We have all the basic information included in our JN0-101 Study Guide to better enable you understand the concepts provided from us. Not only will you be given theoretical, but also given JN0-101 practical labs which will give you even more practice than before.

We designed Test4actual JNCIA JN0-101 Simulation kit to help you get certified effortlessly. Now you don’t need to spend your time and money searching for Test4actual JN0-101 study materials, books, etc., Test4actual JN0-101 exam simulation contains everything you need to get certified. Just follow the instructions, focus on the exam questions and getting certified will be easy.

Test4actual hot exam : 000-104

JN0-101

JNCIA-Junos JN0-101 Exam Description
Designed for experienced networking professionals with beginner-intermediate knowledge of networking, this written exam verifies the candidate’s understanding of the Juniper Networks Junos OS, networking fundamentals and basic routing and switching.
JNCIA-Junos exam topics are based on the content of the recommended instructor led training courses, as well as the additional resources.
The JNCIA-Junos certification is valid for two years. Recertification is achieved by passing the JN0-101 exam.

Exam code: JN0-101
Written exam administered at Prometric testing centers worldwide
Exam length: 105 minutes
Exam type: 65 multiple-choice questions
Scoring and pass/fail status is available immediately
Prerequisite certification: none

JNCIA-Junos JN0-101 Exam Recommended Training:
Introduction to the Junos OS (IJOS)
Junos Routing Essentials (JRE)
Networking Fundamentals WBT
Additional Resources:
Junos Documentation

The problem is which material must be the latest and which can be the most accurate. There are so many materials online nowadays, and it’s really difficult for the candidates to make a right choice. Among the numerous providers you may have heard about test4actual. Test4actual is a professional IT certification exam material provider. It is formed by a team of experienced IT experts who has years of experience in IT sector, also we invite those candidates who passed the Juniper Networks JNCIA JN0-101 exam with full score and have absolutely hard IT knowledge background.

Juniper Networks exams has newly changed a lot! Are you searching for the latest Juniper Networks study materials? Then you are here in the right place. Test4actual experts work hard to provide the candidates latest Juniper Networks dump and now they finished. Almost every Juniper Networks exam has updated. Here we make JN0-101 as an example.

With all the worker’s efforts, we now provide you the newest version of JN0-101 questions. The newest version has totally 487 questions which covers all the knowledge you need to master, With a proper study material, you can save a lot of time and energy. And now Test4actual has a promotion activity, if you purchase now, you can save you money too. At last, I inform you as always I have done; test4actual provides the free demos for you to download, so just get that.

Test4actual hot exam : 000-Z04

JN0-101

All Juniper Networks exams are independent, internationally recognized and based on competencies and job roles, IT-standards, best practices and frameworks. In addition to separate IT exams, Juniper Networks JNCIS offers qualification programs. These consist of learning tracts with exams that complement each other well in practice.

Juniper Networks is a world’s leading internet networking company. Everyone can imagine that if we have a certification of such a brilliant company. JN0-343test is one of the hottest exams of Juniper Networks. Test4actual has released the latest materials of JN0-343 now.

Exam code: JN0-343
Written exam
Administered at Prometric testing centers worldwide
Exam length: 105 minutes
Exam type: 80 multiple-choice questions
Pass/fail status is available immediately
Prerequisite certification: JNCIA-Junos. Acceptable substitutions: JNCIA-ER, JNCIS-ER, JNCIA-EX, JNCIA-M, and JNCIS-M.
Junos Software Release: 11.1
Recommended Training:
Junos Intermediate Routing and Junos Enterprise Switching

Test4actual JNCIS JN0-343 Exam Guide (Juniper Networks Certified Internet Specialist (JNCIS-ENT)) offers free DEMO to download. You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

JN0-343 Detailed Exam Objectives include:
Layer 2 Switching and VLANs
Spanning Tree
Layer 2 Security
Protocol Independent Routing
Open Shortest Path First (OSPF)
Intermediate System to Intermediate System (IS-IS)
Border Gateway Protocol (BGP)
Tunnels
High Availability

Studying with these JN0-343 materials provided by Test4actual you can successfully pass this exam at your first try. If you want to save your energy and valuable time during your preparation of JN0-343, use Test4actual. We have executed all that you need to learn and remember for you, what may carry you weeks to achieve at first.

Test4actual new release exam : 000-M88

JN0-343

Juniper Networks Juniper Networks Certified Internet Associate, Junos (JNCIA-Junos) JN0-101
Exam Number/Code : JN0-101
Exam Name : Juniper Networks Certified Internet Associate, Junos (JNCIA-Junos)
One year free update
Once failed,100% refund
Questions and Answers : 165Q&As
Update Time : 2011-10-6
Price : $79.00

To pass Juniper Networks Company JN0-101 exam more easily, you need to have some reliable JN0-101 materials. Test4actual plays a leading role in providing materials of IT certifications examinations. We fulfill all your certification needs here at Test4actual. Such as JN0-101 braindumps, JN0-101 practice tests, JN0-101 study guides, and other information you need.

JN0-101 exam is designed for candidates who are responsible for the Exchange messaging environment in an enterprise environment. They are senior administrators who act as the technical lead over a team of administrators.

Juniper Networks JN0-101 exam topics: Routing Fundamentals
Define route preference and list some default route preferences
Explain how to view the contents of the routing tables
Explain how the routing and forwarding tables differ
Describe and configure static routing
List the advantages and applications of a dynamic routing protocol

Juniper Networks JNCIA JN0-101 exam topics: Routing Policy and Firewall Filters
Define a term
Explain when import and export policies are evaluated in relation to the learning and advertising of prefixes
List several match criteria and actions for firewall filters and routing policy
Explain some common match criteria and
Identify the results of a route or packet with a given filter or policy
Configure a routing policy and firewall filters

This exam requires the candidates to have a minimum of two years of experience administering, deploying, managing, monitoring, upgrading, migrating and designing Exchange servers. Test4actual JN0-101 practice exam covers the exam objectives and topics you will be tested on.

Test4actual new release exam: 70-432

JN0-101

QUESTION NO: 1

What are two valid actions that can be applied to a frame by a Layer 2 firewall filter?

 (Choose two)

Log

loss-priority

sample

count

Answer:  B, D

The correct answers are B, D.

Reference:

       You can specify the following filter actions:

          * accept

          * count counter-name

          * discard

          * dscp code-point (family inet only)

          * forwarding-class class-name

          * ipsec-sa ipsec-sa (family inet only)

          * load-balance group-name (family inet only)

          * log (family inet and inet6 only)

          * logical-system logical-system-name (family inet and inet6 only)

          * loss-priority (high | medium-high | medium-low | low)

          * next term                  

          * next-hop-group group-name (family inet only)

          * policer policer-name       

          * port-mirror (family bridge, ccc, inet, inet6, and vpls only)

          * prefix-action action-name (family inet only)

          * reject <message-type> (family inet and inet6 only)

          * routing-instance routing-instance-name (family inet and inet6

            only)                      

          * sample (family inet, inet6, and mpls only)

          * service-accounting (service filters and family inet or inet6

            only)                      

          * service-filter-hit (service filters and family inet or inet6

            only)                      

          * syslog (family inet and inet6 only)

          * three-color-policer policer-name

          * topology topology-name (family inet and inet6 only)

          * traffic-class code-point (family inet6) only

QUESTION NO: 2

Which two statements describe differences between IPv4 and IPv6? (Choose two)

IPsec is built into IPv6

IPv6 uses a 32-bit (4-byte) address and can support up to 4,294,967,296 addresses

IPv4 supports extension headers whereas IPv6 options are integrated into the base

IPv6 eliminates the need for NAT

Answer: A, D

QUESTION NO: 3

You must configure an OSPF area that does not accept type 3 link-state advertisements (LSAs) from area 0 (other than the default route) You have configured your area to be stub, but you still see type 3 LSAs.

What will account for this behavior?

You should have configured your area as totally stubby

You should have used a not-so-stubby-area

You are experiencing a routing loop

You have exported routes into OSPF

Answer: A

QUESTION NO: 4

You have configured an IP-IP tunnel between Router A and Router B

Which Junos operational mode command is used to verify that the tunnel interface is up and operational?

show chassis tunnel status

show tunnel interface

show interfaces terse

show interfaces tunnel

Answer: C

QUESTION NO: 5

Which IS-IS packet is used to determine the level of an IS-IS neighbor?

IIH

LSP

PSNP

CSNP

Answer: A

QUESTION NO: 6

Router A is an OSPF router connected to both Area 0 and Area 1 Area 1 has been configured as a stub area Which two LSA types does Router A suppress from Area 1 ?

Router LSA

External LSA

Summary LSA

ASBR Summary LSA

Answer:  A

QUESTION NO: 7

You are logged into a router and have navigated to the (edit routing-options] level of the hierarchy. You have been asked to create a static route that will use 10.10.10.1 as its primary next-hop and 10.10.10.5 as its secondary next-hop.

Which command correctly configures this scenario?

set static route 8/8 10.10.10.1 qualified-next-hop 10.10.10.5 pref 10

set static route 8/8 next-hop 10.10.10.1 secondary-next-hop 10.10.10.5 preference 10

set static route 8/8 next-hop 10.10.10.1 qualified-next-hop 10.10.10.5 preference 10

set static route 8/8 next-hop [10.10.10.1 10.10.10.5] pref 10

Answer: C

QUESTION NO: 8

Which Junos operational mode command is used to verify that load balancing is working as expected?

show route all

show route extensive

show route balancing

show route  forwarding-table

Answer: D

QUESTION NO: 9

Click the Exhibit button

Based on the illustration of the VPLS topology shown in the exhibit, which statement is true?

PE-C must have a spanning-tree protocol enabled

CE-C must have BGP enabled

Traffic forwarded from PE-C to PE-A is forwarded on to PE-B

Traffic forwarded from PE-C to PE-A is not forwarded on to PE-B

Answer: D

QUESTION NO: 10

Which two values displayed in the output from the show spanning-tree MSTP configuration command must match on all switches participating in the same MSTP region? (Choose two)

root bridge identifier

authentication checksum

context identifier

configuration digest

Answer: C, D

JN0-360

Are you preparing for the so-called JN0-360 exams with all you heart and energy? But you still feel that it is to hard to understand. Maybe you need some help from JN0-360 online study materials. By using this kind of materials, everything will become easier for you during your preparing. But you are annoying again when you see so many kinds of study materials. You can’t make you mind which should be adopted by you.

When you choose an IT certification study material you should think of the following aspects: first, if the provider is professional or not. A professional IT certification material provider can provide you with the most accurate and reliable study materials that you can use it relievedly. Second, if the materials are updated regularly. The IT certification exams are always updated. So the materials you choose also should be updated promptly. At last, if the provider guarantees your success at your first try. Test4actual is known to be the best IT certification materials provider. It can meet all your requirements all the above.

“Juniper Networks Certified Internet Specialist (JNCIS-SP)”, also known as JN0-360 exam, is a Juniper Networks certification. With the complete collection of questions and answers, Test4actual has assembled to take you through 78 Q&As to your JN0-360 Exam preparation.

Test4actual has a team of experienced experts who update its braindumps regularly. Test4actual promises to help you pass the JN0-360 at your first attempt or you will get a full refund.

JN0-360

Everyone in this modern society wants to get a good job in the IT sector. And more and more people are crowed to take part in all kinds of IT certification tests, because we all know that if we have such a useful certification then our dream will be more easily to come true. However we also know clearly that it is quite difficult to pass such examinations. We suffer a lot during the course of preparing for these tests. But I must inform you that qualifying such exams is not at all difficult. You just need to follow the right things and you will be able to qualify it pretty simply.

Now, let’s talk about IT certification tests in detail. First, you should buy some relative reference books. The book you buy must be easy for you to study. Then you need an online study material for these tests as the contents of the test will be always changed. The online study material can be updated the time the contents are changed. At last, you need to the install software in your own computer for the tests. What’s more, you need to practice some exams before the real test.

Service Provider Routing and Switching, Professional (JNCIP-SP)”, also known as JN0-660 exam, is a Juniper Networks certification. Maybe you are looking for the proper and reliable JN0-660 online study materials for you to refer to. But there are so many websites who provide the materials. You have difficult in making your choice. Test4actual is a renowned IT certification provider which has years of experience in the IT sector. It has a team of professional IT experts who takes charge of ensure the accuracy of the briandumps, update the materials promptly.

It is very helpful during your preparation for these examinations to have a reliable study material. It can help you save your time and energy. And it max your pass rate of the exam. Test4actual guarantee your success at your first attempt.

In a word, don’t be frightened at these exams; just do your best to prepare for it in a right way with a proper study material. Good luck to all the candidates.

JN0-660

(Website preferential code:allexam10    Use this code can enjoy 10% discount)

“Juniper networks certified internet specialist.e(jncis-e)”, also known as jn0-130 exam, is a Juniper Networks certification.With the complete collection of questions and answers, Test4actual has assembled to take you through 254 Q&As to your jn0-130 Exam preparation. In the jn0-130 exam resources, you will cover every field and category in Juniper Networks certifications helping to ready you for your successful Juniper Networks Certification.

 

The Questions & Answers are the same as your real test. We ensure you pass it with high scores.Goodluck to you!

LOOK THE DEMO FIRST:

 

1. Which CLI command is used to set a Privileged Exec password of mypassword?

A.enable password 0 mypassword

B.enable password 3 mypassword

C.enable password 5 mypassword

D.enable password 10 mypassword

 

ANSWER: A

 

2. You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs each interface is using.

Which CLI command displays this information?

A.show fast interface

B.show vlan interface

C.show vlan subinterface

D.show fast interface vlan

 

ANSWER: C

 

3. Why would you make a non-backbone area a stub or not-so-stubby area?

A.to aggregate routes learned from the ABR

B.to lower the cost of routes advertised by the ABR

C.to connect a non-contiguous area to the backbone

D.to decrease the size of the link-state database in that area

interface vlan

 

ANSWER: D

 

4. Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and 192.168.255.255 into OSPF area 0?

A.network 192.168.0.0 255.255.0.0 area 0.0.0.0

B.network 192.168.0.0 0.0.255.255 area 0.0.0.0

C.area 0.0.0.0 network 192.168.0.0 255.255.0.0

D.area 0.0.0.0 network 192.168.0.0 0.0.255.255

 

ANSWER: B

 

5. Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and why?

A.It is Static. If the priorities are equal for a new neighbor and the current DIS only.

B.It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.

C.It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it is elected as the DIS.

D.It is Static. When a new intermediate system powers up on a multi-access network, even if it has a higher priority, it may become a backup DIS.

 

ANSWER: C

JN0-130

Some practice about the latest Juniper Networks JN0-331 exam which are updated by Test4actual,maybe it will help you pass your exams.
1. Regarding zone types, which statement is true?
A. You cannot assign an interface to a functional zone.
B. You can specifiy a functional zone in a security policy.
C. Security zones must have a scheduler applied.
D. You can use a security zone for traffic destined for the device itself.
Answer: D
2. Regarding attacks, which statement is correct?
A. Both DoS and propagation attacks exploit and take control of all unprotected network devices.
B. Propagation attacks focus on suspicious packet formation using the DoS SYN-ACK-ACK proxy flood.
C. DoS attacks are directed at the network protection devices, while propagation attacks are directed at the servers.
D. DoS attacks are exploits in nature, while propagation attacks use trust relationships to take control of the devices.
Answer: D
3. Click the Exhibit button.
[edit schedulers]
user@host# show
scheduler now {
monday all-day;
tuesday exclude;
wednesday {
start-time 07:00:00 stop-time 18:00:00;
}
thursday {
start-time 07:00:00 stop-time 18:00:00;
}
}
[edit security policies from-zone Private to-zone External]
user@host# show
policy allowTransit {
match {
source-address PrivateHosts;
destination-address ExtServers;
application ExtApps;
}
then {
permit {
tunnel {
ipsec-vpn myTunnel;
}
}
}
scheduler-name now;
Based on the configuration shown in the exhibit, what are the actions of the security policy?
A. The policy will always permit transit packets and use the IPsec VPN myTunnel.
B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel.
C. The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and Wednesday 7am to
6pm, and Thursday 7am to 6pm.
D. The policy will always permit transit packets, but will only use the IPsec VPN myTunnel all day Monday and
Wednesday 7am to 6pm, and Thursday 7am to 6pm.
Answer: C
4. Which two statements are true regarding proxy ARP? (Choose two.)
A. Proxy ARP is enabled by default.
B. Proxy ARP is not enabled by default.
C. JUNOS security devices can forward ARP requests to a remote device when proxy ARP is enabled.
D. JUNOS security devices can reply to ARP requests intended for a remote device when proxy ARP is enabled.
Answer: BD
5. For IKE phase 1 negotiations, when is aggressive mode typically used?
A. when one of the tunnel peers has a dynamic IP address
B. when one of the tunnel peers wants to force main mode to be used
C. when fragmentation of the IKE packet is required between the two peers
D. when one of the tunnel peers wants to specify a different phase 1 proposal
Answer:A

http://www.test4actual.com/jn0-331.html

6. Click the Exhibit button.
[edit groups]
user@host# show
node0 {
system {
host-name NODE0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.1/24;
}
}
}
}
}
node1 {
system {
host-name NODE1;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.2/24;
}
}
}
}
}
In the exhibit, what is the function of the configuration statements?
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
Answer: D
7. Which two statements describe the difference between JUNOS Software for security platforms and a traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support NAT or PAT.
B. JUNOS Software for security platforms does not forward traffic by default; a traditional router forwards traffic by default.
C. JUNOS Software for security platforms uses session-based forwarding; a traditional router uses packet-based forwarding.
D. JUNOS Software for security platforms performs route lookup for every packet; a traditional router performs route lookup only for the first packet.
Answer: BC
8. Which two statements describe the difference between JUNOS Software for security platforms and a traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support NAT or PAT.
B. JUNOS Software for security platforms secures traffic by default; a traditional router does not secure traffic by default.
C. JUNOS Software for security platforms allows for session-based forwarding; a traditional router uses packetbased forwarding.
D. JUNOS Software for security platforms separates broadcast domains; a traditional router does not separate broadcast domains.
Answer: BC
9. A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. Network Address Translation
Answer: B
10. Which three functions are provided by JUNOS Software for security platforms? (Choose three.)
A. VPN establishment
B. stateful ARP lookups
C. Dynamic ARP inspection
D. Network Address Translation
E. inspection of packets at higher levels (Layer 4 and above)
Answer:ADE

More information about Juniper Networks JN0-331 exam you can visit http://www.test4actual.com/jn0-331.html

http://www.test4actual.com
http://blog.test4actual.com

jn0-331 exam

Some practice updated by Test4actual may help you pass your exams.

1. You want to configure Network Connect to allow users to connect through a tunnel, connect to hosts on the same subnet as their local adapter, and shut down any attempt to extend the network boundaries.
How do you proceed?
A. Enable split tunneling.
B. Disable split tunneling.
C. Enable split tunneling with route change monitor.
D. Allow access to local subnet with route change monitor.
Answer: D

2. Which three authentication servers are included with a baseline license? (Choose three.)
A. NIS
B. ACE
C. SAML
D. LDAP
E. SiteMinder
Answer: ABD

3. You create a set of role mapping rules. You select “Merge settings for all assigned roles.” The second role mapping rule has the “Stop processing rules when this rule matches” option selected. A user logs in that matches the first three rules. What happens?
A. This is not a valid combination. The system displays an error message and does not update the configuration.
B. The merge settings override the stop processing option. The user matches all three roles and merging follows the standard merging criteria.
C. The Stop rule prevents any more rule matching after checking the second rule. The merge option only merges the roles of the first two rules following the IVE’s built-in permissive merging rules.
D. The Stop rule prevents any more rule matching after checking the second rule. The user now just matches the second rule. The merge option is overridden and the user is given only the privileges defined by the second role.
Answer: C

4. When using the J-SAM, where on a client machine would you look to verify that the loopback addresses are assigned correctly?
A. HOSTS file
B. ARP cache
C. LMHOSTS file
D. local route table
Answer: A

5. What is Cache Cleaner used for?
A. to prevent users from signing in from insecure machines
B. to remove content downloaded during the IVE session
C. to remove Web content cached by the IVE on behalf of the user
D. to determine which files should be cached between remote access sessions
Answer: B

http://www.test4actual.com/jn0-562.html

6. Which role-based session option would an administrator configure to allow a user to connect from different source IP addresses within the same user session?
A. roaming session
B. persistent session
C. persistent password caching
D. browser request follow-through
Answer: A

7. Which two Web Resource Policy features provide you with the capability to configure the IVE to work with corporate Proxy Servers? (Choose two.)
A. Web Proxy Policies
B. Web Proxy Servers
C. Web Cache Policies
D. Web Passthrough Proxy
Answer: AB

8. Which two statements about SSL VPNs are true? (Choose two.)
A. SSL VPNs provide better security than IPSEC.
B. SSL VPNs provide a dedicated, point to point connection.
C. SSL VPNs provide high performance for individual connections.
D. SSL VPNs use well-known technologies for secure individual connections.
Answer: CD

9. You are using RADIUS as your authorization server. Other than username, which two attributes are available for creating role mapping rules? (Choose two.)
A. Certificate
B. User Attribute
C. RSA Attributes
D. Group Membership
Answer: AB

10. Where is the IVE typically deployed in the network?
A. behind the Internet firewall
B. internally with all clients directly cabled to the IVE
C. both interfaces on the outside of the Internet firewall
D. parallel to the Internet firewall with one interface on the outside and one on the inside
Answer: A

http://www.test4actual.com
http://www.test4actual.com/jn0-562.html
http://www.oracle-exam.com

JN0-562 exam

Some practice updated by Test4actual may help you pass your exams.
1.Which two statements are correct regarding NHTB? (Choose two.)
A. The NHTB table can be viewed with the command get nhtb.
B. The NHTB table can be viewed with the command get interface .
C. The NHTB table can be viewed with the command get interface .
D. NHTB is enabled automatically when multiple VPNs are bound to a single tunnel interface.
Answer: BD

2. Which two statements are true regarding the use of dialup VPNs? (Choose two.)
A. They are initiated only by the remote host PC.
B. They can only be connected to the trust zone on a ScreenOS device.
C. They are configured so that the first IKE message will always have the SA proposal list.
D. They can be used as an alternative to connect remote users when a ScreenOS device has reached the maximum number of LANtoLAN tunnels.
Answer: AC

3. Your ScreenOS device has come under a SYN flood attack. In the logs, which severity level would you search to see this event?
A. Alert
B. Critical
C. Warning
D. Emergency
Answer: D

4. Which command will show address translation for sessions that have ended?
A. snoop
B. get session
C. get log traffic
D. get dbuf stream
Answer: C

5.Which item in a virtual system is shared by default?
A. trust zone in the trustvr
B. trust zone in the untrustvr
C. untrust zone in the trustvr
D. untrust zone in the untrustvr
Answer: C

http://www.test4actual.com/jn0-531.html

6. What should you configure to insure an HA cable failure does not result in both devices attempting to become master?
A. failover count
B. secondary path
C. monitor threshold
D. heartbeat threshold
Answer: B

7. What will happen if you type the command unset protocol vrouter trustvr protocol ospf?
A. OSPF stops running, but the OSPF configuration is left intact.
B. All OSPF configuration parameters are removed from the vrouter only.
C. All OSPF configuration parameters are removed from all interfaces in the vrouter.
D. All OSPF configuration parameters are removed from the vrouter and from all interfaces in the vrouter.
Answer: D

8. To which three ScreenOS components can a policybased routing policy be bound? (Choose three.)
A. zone
B. policy
C. interface
D. virtual router
E. virtual system
Answer:ACD

9. Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A. set igmp interface ethernet0/1
B. set multicast interface ethernet0/1
C. set interface ethernet0/1 igmp router
D. set igmp interface ethernet0/1 enable
Answer: C

10. Which command is used to verify that IGMP is running correctly?
A. get route igmp
B. get igmp query
C. set igmp query interface e0/1
D. exec igmp interface e0/1 query
Answer: D

http://www.test4actual.com

11. Which CLI command identifies the multicast sources visible to your ScreenOS device?
A. get route pim
B. get igmp source all
C. exec pim interface all query
D. get vrouter trustvr protocol pim
Answer: D

12. Click the Exhibit button.
Inthe exhibit, what is the source IP address of the multicast traffic?
A. 236.1.1.1
B. 10.10.10.1
C. 20.20.20.10
D. 20.20.20.200
Answer: B

13. During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A. messages 1 & 2
B. messages 2 & 3
C. messages 3 & 4
D. messages 5 & 6
Answer: D

14. Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A. proxyid,
SA proposal list
B. IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D. SA proposal list, optional DH key exchange
Answer: AD

15. What must be enabled to protect Phase 2 key exchanges?
A. Phase 1 PFS
B. Phase 2 SHA
C. Phase 2 3DES
D. Phase 2 DH key exchange
Answer: D

http://www.test4actual.com/jn0-531.html

16. Which three statements are true regarding IKE Phase 1? (Choose three.)
A. Placing the SA proposal list in message 1 is an option.
B. The digital certificate is used to decrypt the session key.
C. The DH key exchange is used to validate the session key.
D. The DH key exchange and digital certificates are both optional.
E. The proxyid is used to determine which SA is referenced for the VPN.
Answer: ABC

17. What must be configured differently for a routebased VPN and a policybased VPN?
A. proxyid
B. proposals
C. remote gateway type
D. binding the tunnel interface
Answer: D

18. You have configured the following on your device.The VPN is not working properly. What is the problem?
A. The policy needs to have the action tunnel.
B. The VPN needs to be bound to the tunnel interface.
C. The tunnel interface needs to be placed in the trust zone.
D. The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

19. You create a policybased VPN, and select an address group for the source address.What will be the source component of the proxyid seen by the remote security gateway?
A. the default 0.0.0.0/0
B. the last member of the address group
C. the first member of the address group
D. the subnet that contains all addresses in the address group
Answer: A

20. Click the Exhibit button.
In the exhibit, the routebased VPN on the SSG 5 needs to configured to allow access only from your PC 8 to Server G. The SSG 550 is configured with a policybased VPN from Server G to your PC’s host address.Assume the gateways are static.Which proxyid must be configured?
A. Local: 10.0.0.5/24Remote: 20.0.0.5/24
B. Local: 10.0.0.5/32Remote: 20.0.0.5/32
C. Local: 1.1.1.250/32Remote: 4.4.4.250/32
D. Local: 1.1.1.250/24Remote: 4.4.4.250/24
Answer: B

http://www.test4actual.com
http://www.test4actual.com/jn0-531.html
http://www.oracle-exam.com

JN0-531 exam

I have passed the Juniper Networks JN0-342 exam recently,if you are worried about it,maybe I can share some experience with you.A colleague of mine, who have got the Juniper Networks certification, recommend Test4actual to me, saying that without the help of test4actual, he couldn’t have passed the exam.
Any doubts about the products quality left? Try the Test4actual Juniper Networks JN0-342 exam free demo before buy!

1. Which multicast address does RIPv2 use for route updates by default?
A. 224.0.0.2
B. 224.0.0.5
C. 224.0.0.9
D. 255.255.255.255
Answer: C

2. What are three methods for managing a Juniper Enterprise Router? (Choose three.)
A. CLI
B. SDX
C. SAP
D. J-Web
E. J-Config
Answer: ABD

3. Which IGP should you use to achieve scalability in a large enterprise network using Juniper enterprise routers?
A. RIP
B. BGP
C. OSPF
D. EIGRP
Answer: C

4. Which configuration statement allows local non-root users access to the router only when the RADIUS server is unreachable?
A. [edit]
system {
authentication-order radius;
}
B. [edit]
system {
authentication-order [ radius password ];
}
C. [edit]
system {
authentication-order [ radius if-authenticated ];
}
D. [edit]
system {
authentication-order [ radius local ];
}
Answer: A

5. Which two statements about the Adaptive Services PIC are true? (Choose two.)
A. The Adaptive Services PIC supports the Layer 3 service package by default.
B. The Adaptive Services PIC is required when using the secure shell to access an M-series router.
C. The Adaptive Services PIC can be configured for the Layer 2 and Layer 3 service packages simultaneously.
D. The Adaptive Services PIC can be configured for either the Layer 2 or the Layer 3 service package but not both at the same time.
Answer: AD

http://www.test4actual.com/JN0-342.html

6. What are two benefits of MLPPP? (Choose two.)
A. Cost-efficient solution when incrementing bandwidth.
B. Provides for fail over when the primary link goes down.
C. Evenly distributes traffic over participating member links.
D. Guarantees that the link will remain up during failure scenarios.
Answer: AC

7. Which major J-Web menu should you use to upgrade the JUNOS software on the router?
A. Monitor
B. Manage
C. Diagnose
D. Configuration
Answer: B

8. How are multiple policies evaluated within the JUNOS software?
A. alphabetically
B. as an ordered list
C. in a round robin manner
D. numerically from lowest to highest
Answer: B

9. Which statement is true about accessing a Juniper enterprise router using a Web browser?
A. J-series routers are accessible by default.
B. M7i and M10i routers are accessible by default.
C. You need to install a license before accessing a J-series router.
D. You need to enable the HTTP service on M7i, M10i, and J-series routers before accessing them.
Answer: A

10. What are two ways to create a rescue configuration on a J-series router? (Choose two.)
A. Use the J-Web System > Rescue menu.
B. Use the J-Web Configuration > Rescue menu.
C. Issue the configure rescue save command.
D. Issue the request system configuration rescue save command.
Answer: BD

http://www.test4actual.com
http://www.test4actual.com/JN0-342.html
http://www.oracle-exam.com

JN0-342 exam

Here are some practice about Juniper Networks JN0-342 exam which are latest released by Test4actual,it provides a lot of IT certification exams,I hope they will help you pass your test.

1. Which multicast address does RIPv2 use for route updates by default?
A. 224.0.0.2
B. 224.0.0.5
C. 224.0.0.9
D. 255.255.255.255
Answer: C

2. What are three methods for managing a Juniper Enterprise Router? (Choose three.)
A. CLI
B. SDX
C. SAP
D. J-Web
E. J-Config
Answer: ABD

3. Which IGP should you use to achieve scalability in a large enterprise network using Juniper enterprise
routers?
A. RIP
B. BGP
C. OSPF
D. EIGRP
Answer: C

4. Which configuration statement allows local non-root users access to the router only when the RADIUS server is unreachable?
A. [edit]
system {
authentication-order radius;
}
B. [edit]
system {
authentication-order [ radius password ];
}
C. [edit]
system {
authentication-order [ radius if-authenticated ];
}
D. [edit]
system {
authentication-order [ radius local ];
}
Answer: A

5. Which two statements about the Adaptive Services PIC are true? (Choose two.)
A. The Adaptive Services PIC supports the Layer 3 service package by default.
B. The Adaptive Services PIC is required when using the secure shell to access an M-series router.
C. The Adaptive Services PIC can be configured for the Layer 2 and Layer 3 service packages simultaneously.
D. The Adaptive Services PIC can be configured for either the Layer 2 or the Layer 3 service package but not both at the same time.
Answer: AD

6. What are two benefits of MLPPP? (Choose two.)
A. Cost-efficient solution when incrementing bandwidth.
B. Provides for fail over when the primary link goes down.
C. Evenly distributes traffic over participating member links.
D. Guarantees that the link will remain up during failure scenarios.
Answer: AC

7. Which major J-Web menu should you use to upgrade the JUNOS software on the router?
A. Monitor
B. Manage
C. Diagnose
D. Configuration
Answer: B

8. How are multiple policies evaluated within the JUNOS software?
A. alphabetically
B. as an ordered list
C. in a round robin manner
D. numerically from lowest to highest
Answer: B

9. Which statement is true about accessing a Juniper enterprise router using a Web browser?
A. J-series routers are accessible by default.
B. M7i and M10i routers are accessible by default.
C. You need to install a license before accessing a J-series router.
D. You need to enable the HTTP service on M7i, M10i, and J-series routers before accessing them.
Answer: A

10. What are two ways to create a rescue configuration on a J-series router? (Choose two.)
A. Use the J-Web System > Rescue menu.
B. Use the J-Web Configuration > Rescue menu.
C. Issue the configure rescue save command.
D. Issue the request system configuration rescue save command.
Answer: BD

http://www.test4actual.com/JN0-342.html

11. Which CLI command allows you to determine how many licenses are currently used on the router and are further needed by the router?
A. show system license key
B. show system license usage
C. show system license total
D. show system license profile
Answer: B

12. Which logical unit number must be configured on an interface using PPP encapsulation?
A. unit 0
B. unit 1
C. unit 100
D. unit 255
Answer: A

13. The J-Web application can install the JUNOS software from which two locations? (Choose two.)
A. SDX
B. local PC
C. BSD shell
D. remote host
Answer: BD

14. What is the default route preference for static routes?
A. 0
B. 5
C. 10
D. 170
Answer: B

15. Which two statements about the track configuration option are correct? (Choose two.)
A. The track option monitors interfaces as defined by the user.
B. The track option monitors all interfaces participating in VRRP.
C. The track option allows for a reduction of the priority value if the monitored interface goes down.
D. The track option causes syslog entries to be written in the messages log file, if the monitored interface goes down.
Answer: AC

16. Which configuration example represents a services interface configured for a MLPPP bundle on a J-series router?
A. ml-0/0/0 {
unit 0 {
family inet {
address 172.18.37.5/30;
}
B. lsq-0/0/0 {
unit 0 {
family inet {
address 172.18.37.5/30;
}
C. sp-0/0/0 {
unit 0 {
family inet {
address 172.18.37.5/30;
}
D. ls-0/0/0 {
unit 0 {
family inet {
address 172.18.37.5/30;
}
Answer: D

17. What happens when a route does not match any user configured policies?
A. The route is rejected.
B. The route is accepted.
C. The route is given a lower priority.
D. The route is sent to the default policy.
Answer: D

18. Which three steps are required when configuring NAT? (Choose three.)
A. Define a rule-set.
B. Define a NAT rule.
C. Create a NAT pool.
D. Define services interface.
E. Configure an application-set.
Answer: BCD

19. Which three initial configuration methods are supported on J-series routers? (Choose three.)
A. CLI
B. J-Web
C. JUNOScope
D. autoinstallation
E. PCMCIA flash card
Answer: ABD

20. What is a correct configuration using autoinstallation?
A. [edit system autoinstallation]
user@host# show
interfaces {
ge-0/0/0 {
rarp;
}
configuration-servers {
tftp://tftpconfig.sp.com/config.conf;
}
B. [edit system autoinstallation]
user@host# show
interfaces {
ge-0/0/0 {
rarp;
}
bootp-servers {
10.34.1.1;
}
C. [edit system autoinstallation]
user@host# show
configuration-servers {
tftp://tftpconfig.sp.com/config.conf;
interfaces ge-0/0/0 slarp;
}
D. [edit system autoinstallation]
user@host# show
interfaces {
ge-0/0/0 {
dhcp;
}
configuration-servers {
tftp://tftpconfig.sp.com/config.conf;

}
Answer: A

http://www.test4actual.com
http://www.test4actual.com/JN0-342.html
http://www.oracle-exam.com

JN0-342 exam

“JNCIA “, also known as JN0-341 exam, is a Juniper Networks certification.
Exam Details
The JNCIA exam is the qualifying exam available to candidates pursuing a single-exam option for the Juniper Networks Certified Network Associate JNCIA certification. The JNCIA (JN0-341) exam will test materials from the new Interconnection Juniper Networks Network Devices (ICND) course as well as the new Introduction to Juniper Networks Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Juniper Networks networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

The latest exams are provided by Test4actual,hope to help you!
1.Which command copies the factorydefault files to your backup media?
A.request system snapshot rescue
B.request system snapshot factory
C.request system snapshot default
D.request system snapshot asprimary
Correct:B

2.What are two methods of accessing a Juniper enterprise router? (Choose two)
A.RSH
B.HTTPS
C.console
D.JConfig
Correct:B C

3.What is the default route preference for static routes?
A.0
B.5
C.10
D.170
Correct:B

4.What is shown by the command show interfaces extensive fe0/0/0 but not shown by the command show interface detail fe0/0/0?
A.input error counter
B.interface MTU size
C.input packets counter
D.the IP address on logical interface fe0/
0/0.0
Correct:A

5.What does the number one (1) represent for interface fe0/0/1?
A.port number
B.PCI slot number
C.channel number
D.virtual PIC number
Correct:A

http://www.test4actual.com/Jn0-341.html

6.What are two functions of the Intel IXP processors? (Choose two.)
A.keepalives
B.routelookup
C.CRC validation
D.Layer 2 decapsulation
Correct:A C

7.Which CLI command will ping destination 10.0.29.1 ten times and display the incoming interface of the received packet?
A.ping count 10 10.0.29.1 detail
B.ping number 10 10.0.29.1 detail
C.ping count 10 10.0.29.1 extensive
D.ping number 10 10.0.29.1 extensive
Correct: A

8.Which JWeb menu displays the users currently logged into the CLI?
A.Monitor > Users
B.Manage > Users
C.Monitor > System
D.Manage > System
Correct:C

9.Which multicast address does RIPv2 use for route updates by default?
A.224.0.0.2
B.224.0.0.5
C.224.0.0.9
D.255.255.255.255
Correct:C

10.Which two statements regarding system logging on a Juniper enterprise router are correct?(Choose two.)
A.The system log has a proprietary format.
B.System logs must be sent to a remote device.
C.New system logs can be created and archived.
D.Most software processes create their own logs.
Correct:C D

http://www.test4actual.com
http://www.test4actual.com/Jn0-341.html
http://www.oracle-exam.com

Jn0-341 exam