Test4actual certification

1. A user is unable to connect to the Cisco Router and Security Device Manager via HTTPS. Which two of these might have caused this problem? (Choose two.)
Select 2 response(s).
A. The ip https server command is missing from the running configuration.
B. The ip http secure-server command is missing from the running configuration.
C. The user is trying to launch Cisco Router and Security Device Manager from the inside (secured) interface with a firewall enabled.
D. The user has a privilege level lower than 15.
E. The browser security level is set too high.
Answer: BD

2. Refer to the exhibit. A host on the Sales subnet (10.0.2.0/24) is not able to initiate a web connection to an outside website. According to the network diagram and partial Cisco Adaptive Security Device Manager configuration shown in the exhibit, what is the cause of the problem?
754364259.jpg
Select the best response.
A. The dynamic NAT global pool is not configured correctly.
B. The source networks for static NAT are not configured correctly.
C. The administrator has not added an access list to allow the connection.
D. The source network for dynamic NAT is not configured correctly.
Answer: D

3. Users logging into Cisco Router and Security Device Manager should be authenticated using the Cisco ISR local user database. Currently, none of the users can access Cisco Router and Security Device Manager via HTTP. You should check the configuration of which command or commands when attempting to resolve this problem?
Select the best response.
A. ip http secure-server
B. ip http authentication local
C. line vty 0 5 login local
D. aaa new-model
aaa authentication login default local
Answer: B

4. You are troubleshooting OSPF neighbor establishment problems, which are occurring over Frame Relay interfaces that use the default OSPF network type. What should you verify in the router configuration?
Select the best response.
A. the ip ospf network point-to-point statement under the Frame Relay interface
B. the ip ospf priority 0 statement on the Frame Relay interface on the designated router
C. the neighbor statements on the Frame Relay interface
D. the frame-relay map statement on the Frame Relay interface
Answer: D

5. Which critical issue should you account for when implementing an integrated network security management design?
Select the best response.
A. NAT interoperates with encrypted voice traffic
B. host-based intrusion detection systems reside in the network
C. all network devices are time-synchronized
D. SNMP community read-write strings are configured to allow for total management access
Answer: C

http://www.test4actual.com/642-383.html

6. You are configuring a VLAN and the switch you are using requires that you do so within the VLAN database. Which command allows you to enter the VLAN database?
Select the best response.
A. Switch# vlan database
B. Switch(config)# vlan database
C. Switch(config-if)# vlan database
D. Switch(vlan)# vlan database
Answer: A

7. Which command assigns a cost value of “17″ to a switch port?
Select the best response.
A. spanning-tree interface fastethernet 5/8 17
B. spanning-tree portcost 17
C. spanning-tree port cost 17
D. spanning-tree vlan 1 cost 17
Answer: D

8. In what location is it recommended that the Cisco Catalyst 6500 Series WLSM be placed?
Select the best response.
A. distribution layer
B. core layer
C. access layer
D. network management functional module
Answer: A

9. Which network management tool is designed to allow businesses to manage up to 40 devices?
Select the best response.
A. CiscoWorks Unrestricted
B. CiscoWorks SNMS
C. Campus Manager
D. Resource Management Essentials
Answer: B

10. A customer with a small enterprise network of 15 remote sites is trying to optimize its VPN by migrating some remote sites using Frame Relay connections to the Internet to using cable connections to the Internet. Minimizing costs is one of the customer’s highest priorities. Only a moderate amount of IP traffic is passing through the network, most of which is from the remote sites to the central site. IPSec should be used to provide VPN functionality and basic confidentiality is desired.Based on the traffic patterns, which topology would be the easiest for this customer to set up and manage?
Select the best response.
A. full mesh
B. partial mesh
C. point-to-multipoint
D. hub-and-spoke
Answer: D

Exam : 2B0-015
Title : ES Wireless
Version : DEMO
1. When configuring LAN-to-LAN Endpoint, which of the following do you need?
A. Wired MAC Address of the remote Access Point
B. Wireless MAC Address of the remote Access Point
C. IP Address of the remote Access Point
D. Different channels configured on both Access Points
Answer: B
2. What are two solutions to a “Hidden Station” problem?
A. Enable the RTS/CTS Protocol
B. Increase the transmission power of the station
C. Increase the Density setting
D. Move the problem station
Answer: AD
3. What media access method does the RoamAbout use?
A. CSMA/CD
B. Beacon exchange
C. Binary Sequential Back off
D. CSMA/CA
Answer: D
4. Up to how many buildings may be connected in a Point-to-Multipoint configuration?
A. 3
B. 7
C. 8
D. 12
Answer: B
5. In which of the following devices is the PC Radio Card NOT used?
A. Laptops
B. Carrier (adapter) modules
C. Omni-directional antenna
D. Wireless Ethernet Adapter
Answer: C
6. How do you avoid radio frequency interference within an area when positioning multiple APs with 802.11b PC Cards installed?
A. Configure different network names on the APs
B. Enable Secure Access
C. Configure overlapping cells at least five channels apart
D. Maintain at least 100 meters distance between APs
Answer: C
7. Which of the following is NOT a source of radio interference?
A. Microwave ovens
B. Overhead power lines
C. Cable TV
D. Theft detection devices
Answer: C
8. What is the default password on the R2?
A. public
B. admin
C. password
D. private
Answer: C

http://www.test4actual.com/2b0-015.html

9. When should an Upline Dump be enabled for the AP 2000?
A. When configuring the AP for an upgrade to its firmware
B. When troubleshooting a poor SNR
C. When copying configurations from one AP to another
D. When requested by a RoamAbout service representative
Answer: D
10. What does the RoamAbout employ, by default, to confirm successful frame delivery?
A. The receiving station sends a MAC level acknowledgement
B. Resolution by upper layer protocols (i.e., TCP) at the sending station
C. The sending station sends a source frame to verify delivery
D. There is no method of ensuring successful delivery
Answer: A
11. Which of the following does NOT affect the size of a cell?
A. Network utilization
B. Radio frequency noise
C. Transmit speeds
D. Humidity
Answer: D
12. Why is it important to read Release Notes when installing a wireless PC Card and its drivers?
A. To enable you to decipher LED indications
B. They include a PC Card license key
C. To learn about restrictions and requirements for your OS
D. To learn what channels are supported in your geographic region
Answer: C
13. Which AP Manager utility is used during LAN-to-LAN installations to determine signal strength?
A. Authentication
B. Link test
C. Integrity Check
D. Site Monitor
Answer: B
14. What file extension is used for RoamAbout Boot ROM image files?
A. .txt
B. .asp
C. .WEP
D. .BIN
Answer: D
15. With Secure Access enabled on an AP with an IEEE 802.11b PC Card installed, which of the following is true?
A. The AP allows access to wireless clients that use “ANY” as the wireless network name
B. The AP allows access to wireless clients that leave the wireless network name configuration blank
C. The AP denies access to wireless clients that do not provide the proper access password
D. The AP denies access to wireless clients that do not use the correct wireless network name
Answer: D

Product Description
Exam Number/Code: 2B0-015
Exam Name: ES Wireless
Questions and Answers:90Q&A
Update Time:2010-1-16
Price:$109.00
Exam Details
The Enterasys Networks Certification exam is the qualifying exam available to candidates pursuing a single-exam option for the Enterasys Networks Certified Network Associate Enterasys Networks Certification certification. The Enterasys Networks Certification (2B0-015) exam will test materials from the new Interconnection Enterasys Networks Network Devices (ICND) course as well as the new Introduction to Enterasys Networks Networking Technologies (INTRO) course. The exam will certify that the successful candidate has important knowledge and skills necessary to select, connect, configure, and troubleshoot the various Enterasys Networks networking devices. The exam covers topics on Extending Switched Networks with VLANS, Determining IP Routes, Managing IP traffic with Access Lists, Establishing Point-to-Point connections, and Establishing Frame Relay Connections.

Quality and Value for the 70-686 exam
Test4actual Practice Exams for Microsoft Mcse2000 TO Mcse2003 Upgrade 70-686 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your 70-686 exam
If you prepare for the exam using our Test4actual testing engine, we guarantee your success in the first attempt. If you do not pass the 70-686 exam Mcse2000 TO Mcse2003 Upgrade Designing for Microsoft Internetwork Solutions) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

Microsoft 70-686 Downloadable, Printable Exams (in PDF format)
Our Exam 70-686 Preparation Material provides you everything you will need to take your 70-686 exam. The 70-686 exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

Exam : Microsoft 70-686
Title : Pro:Windows® 7, Enterprise DesktopAdministrator
Version : DEMO
1. Your company has a single Active Directory Domain Services (AD DS) domain named contoso.com that uses Active Directory–integrated DNS.
You deploy the Key Management Service (KMS) on a Windows 7 computer.
You need to ensure that Windows 7 client computers can locate the KMS host and perform activation.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Deploy a Windows Server 2008 KMS host.
B. Grant the KMS server the Full Control permission on the _vlmcs._tcp.contoso.com DNS record.
C. Grant the KMS server the Full Control permission on the _msdcs._tcp.contoso.com DNS zone.
D. Create and deploy a GPO firewall rule to allow RPC traffic through TCP port 1688 on the client computers.
Answer: BD
2. Your network consists of 1,000 client computers that run Windows XP. The computers do not have access to the Internet.
You plan to migrate 200 of the computers immediately to Windows 7. The remainder will be migrated over the next several months.
You need to plan the most efficient method for activating all of the computers.
What should you do?
A. Use the Key Management Service (KMS) for all the computers.
B. Use Multiple Activation Key (MAK) Independent for all the computers.
C. Use Multiple Activation Key (MAK) Proxy for the first 200 computers, and then use the Key Management Service (KMS) for the remaining computers.
D. Use Multiple Activation Key (MAK) Independent for the first 200 computers, and then use Multiple Activation Key (MAK) Proxy for the remaining computers.
Answer:A
3. Your company’s network has client computers that run Windows 7.
When a user attempts to log on to the domain from a computer named Client1, she receives the following message:
The system cannot log you on to this domain because the system’s computer account in its primary domain is missing or the password on that account is incorrect.
You need to ensure that the user can log on to the domain from Client1.
What should you do?
A. Disjoin and rejoin Client1 to the domain.
B. Add the computer account for Client1 to the Domain Computers Active Directory group.
C. Reset the account password for Client1 through Active Directory Users and Computers.
D. Reset the account password for the user through Active Directory Users and Computers.
Answer:A
4. The client computers in your network run either Windows XP or Windows 7. All client computers are in a single Active Directory Domain Services (AD DS) organizational unit (OU) named MyClients.
You install Windows Software Update Services (WSUS). You create a Group Policy object (GPO) that enables automatic updates from the WSUS server, and you link the GPO to the MyClients OU. You place all client computers in a targeting group named MyClients.Testing reveals that a security update that is applicable to both Windows XP and Windows 7 causes a line-ofbusiness application to fail on the Windows XP client computers.
You need to ensure that the application runs on the Windows XP client computers and that the Windows 7 client computers receive the security update.
What should you do?
A. Remove the Windows 7 client computers from the MyClients targeting group. Approve the update for installation to the All Computers targeting group.
B. Remove the Windows XP client computers from the MyClients targeting group. Approve the update for installation to the All Computers targeting group.
C. Remove the Windows 7 client computers from the MyClients targeting group. Approve the update for installation to the Unassigned Computers targeting group.
D. Create a targeting group named MyXPClients beneath the MyClients targeting group. Move the Windows XP client computers to the MyXpClients targeting group. Approve the update for installation to the MyClients targeting group.
Answer: C
5. Your company uses Microsoft Windows Server Update Services (WSUS) to deploy software updates and service packs.
Microsoft releases a security update for Windows 7.
You have the following requirements:
·The security update must be deployed by 5:00 P.M. on Friday.
·Computers that are off when the security update is deployed must install the security update as soon as they are turned on.
You need to manage the software update process to meet the requirements.
What should you do?
A. Approve the security update for installation through the WSUS console with a deadline of Friday at 5:00 P.M.
B. Approve the security update for installation through the WSUS console with no deadline.
C. Approve the security update for download through the WSUS console with a deadline of Friday at 5:00 P.M.
D. Approve the security update for download through the WSUS console with no deadline.
Answer:A

http://www.test4actual.com/70-686.html

6. Your company has client computers that run Windows Vista and client computers that run Windows 7. The client computers connect directly to the Microsoft Update Web site once per week and automatically install all available security updates.
Microsoft releases a security update for Windows 7.
You have the following requirements:
·Create a report of all Windows 7 computers that are currently connected to the network and that do not have the security update installed.
·Use the least amount of administrative effort.
You need to manage the software update process to meet the requirements.
What should you do?
A. Deploy Microsoft Windows Server Update Services (WSUS). Approve the security update for installation, and force a detection cycle on the client computers.
B. Deploy Microsoft Windows Server Update Services (WSUS). Approve the security update for detection, and force a detection cycle on the client computers.
C. Use the Microsoft Baseline Security Analyzer (MBSA) to scan the client computers. Configure MBSA to use the Microsoft Update site catalog.
D. Use the Microsoft Baseline Configuration Analyzer (MBCA) to scan the client computers.
Answer: C
7. Your network has a single domain with 1,000 client computers that run Windows Vista. All client computers are members of the domain.
You are planning to deploy Windows 7.
You need to create a report that shows hardware and device compatibility on all client computers. You need to perform this action without installing any additional software on the client computers.
Which tool should you use?
A. System Center Capacity Planner
B. System Center Configuration Manager
C. Microsoft Assessment and Planning Toolkit
D. Windows Performance Monitor Data Collector Sets
Answer: C
8. Your company has client computers that run Windows 7 Enterprise.
You need to provide 10 users with an additional operating system boot option.
What should you do?
A. Use Bootcfg to modify the boot parameters.
B. Use the DiskPart tool in Windows?PE to attach a Virtual Hard Drive (VHD).
C. Use BCDedit to add a native-boot Virtual Hard Drive (VHD) entry to the boot menu.
D. Use BCDboot to modify the system partition.
Answer: C
9. You are designing a Windows 7 virtual desktop infrastructure.
You have the following requirements:
·Provide access to Remote Desktop Services RemoteApp sources from multiple remote desktop servers.
·Support network load balancing.
·Support reconnection to existing sessions on virtual desktops.
You need to specify a design that meets the requirements.
What should you include in your design?
A. Remote Desktop Gateway
B. Remote Desktop Connection Broker
C. Windows Deployment Services
D. Windows Virtual PC and Windows XP Mode
Answer: B
10. Your company has 1,000 client computers that run Windows 7. The company uses several custom line-ofbusiness applications that are not compatible with Windows 7.
You need to distribute a Microsoft Enterprise Desktop Virtualization (MED-V) v2 virtual machine (VM) image that includes the custom applications to all Windows 7 client computers.
What should you do?
A. Deploy the VM image from the MED-V server.
B. Mount the VM image from the MED-V workspace.
C. Deploy the VM image by using Windows Deployment Services (WDS).
D. Deploy the VM image by using Windows Server Update Services (WSUS).
Answer:A

Product Description
Exam Number/Code: 70-686
Exam Name: Pro: Windows® 7, Enterprise Desktop Administrator
Questions and Answers:95Q&A
Update Time:2010-1-16
Price:$149.00
“Mcse2000 TO Mcse2003 Upgrade “, also known as 70-686 exam, is a Microsoft certification.
Preparing for the 70-686 exam? Searching 70-686 Test Questions, 70-686 Practice Exam, 70-686 Dumps?With the complete collection of questions and answers, Test4actual has assembled to take you through 95 Q&A to your 70-686 exam preparation. In the 70-686 exam resources, you will cover every field and category in Mcse2000 TO Mcse2003 Upgrade helping to ready you for your successful Microsoft Certification.